Edirol PCR-A30, Owner'S Manual

Page: 53 / 112

53
Using the PCR-A30 as a MIDI controller
Assign MIDI messages
(EDIT)
You can assign the following functions to a controller.
You will use Edit mode to assign MIDI messages.
* If you want to assign a single-byte system message (system realtime message, tune request) or a freely
specified message of up to 24 bytes, refer to “Sys Ex. ASSIGN” (p. 66).
●
Edit mode ( EDIT )
fig.EDIT-1_60
fig.edt2
1
Press the [EDIT] button.
The display will indicate “ EDT”.
2
Use the controllers or keyboard to select the item you want to set.
You can copy assigned messages to another
controller, or cancel an assignment. For de-
tails, refer to
“Copying a MIDI message
assignment (ASSIGN COPY)”
(p. 74) or
“Canceling a MIDI message assignment
(NO ASSIGN)”
(p. 75).
NOTE
NOTE ASSIGN
(p. 55)
AFTERTOUCH
AFTERTOUCH ASSIGN
(p. 57)
CONTROL CHANGE
CONTROL CHANGE ASSIGN
(p. 59)
PROGRAM CHANGE
PROGRAM CHANGE ASSIGN
(p. 61)
RPN
RPN/NRPN ASSIGN
(p. 64)
NRPN
RPN/NRPN ASSIGN
(p. 64)
Sys Ex
Sys Ex. ASSIGN
(p. 66)
TEMPO (20-250)
TEMPO ASSIGN
(p. 73)
1
2
How Basic mode and Advanced mode differ
The assignment s “NOTE“ , “AFTERTOUCH“ , “CONTROL CHANGE“ , “PROGRAM
CHANGE“ , “RPN“ , “NRPN“ , “Sys.Ex“ can be made either in Basic mode or Advanced
mode .
Use the mode that is appropriate for your purpose.
• Basic mode : You can make assignments easily, with the minimum number of steps.
• Advanced mode: A greater number of steps are required, but you can specify more
parameters and make more sophisticated assignments.
* For these assignments, the rightmost digit (third place) in the display is a number that indicates the mode
(Basic mode or Advanced mode).
PCR-A30_e2.book 53 ページ ２００３年１０月２２日 水曜日 午後３時１９分