Edirol PCR-A30, Owner'S Manual

Page: 73 / 112

73
Using the PCR-A30 as a MIDI controller
■
TEMPO ASSIGN
You can assign a controller to adjust the speed (20–250) of the F8 Clock message.
* In order to transmit F8 Clock messages, the F8 CLOCK setting must be “ON”.
(
➔
“F8 CLOCK ON/OFF” (p. 83))
fig.edt
1
Press the [EDIT] button.
The display will indicate “EDT.”
fig.r-1
2
Slightly move the controller to which you want to assign TEMPO. In the case
of a button, press that button.
The display will indicate the number of the selected controller.
3
Confirm what’s indicated and press the [ENTER] button.
fig.tmp
4
Press the [TEMPO] key.
The display will indicate “TMP”.
5
Confirm what’s indicated and press the [ENTER] button.
6
If you are making the assignment for a button, specify the button mode. (
➔
“Specifying the
button mode” (p. 54))
In the case of a button, the value will be fixed at maximum (250) for ON, and minimum (20) for
OFF.
PCR-A30_e2.book 73 ページ ２００３年１０月２２日 水曜日 午後３時１９分