This jumper selects the signal on PIN 17 of the DB25.
Jumper to the right => PWM out.
Jumper to the left => 0-10 Volt out.
This jumper controls the watchdog output at PIN 16
of the SUBD 25.
The upper jumper controls the output being NPN or
PNP.
The lower jumper controls the output polarity.
The details of the watchdog output configuration
jumpers.
Upper jumper to the right => Open Collector NPN.
Use with external supply.
Upper jumper to the left => Open Collector PNP (+5V)
output. Use with in5V supply.
Lower jumper to the right =>NPN Active SAFE.
PNP Active NOTSAFE.
Lower jumper to the left=>NPN Active NOT SAFE.
PNP Active SAFE.
