background image

4

Introduction

CTC Cross-The-Counter systems are complete systems for equipping reception desks 
and counters with an induction loop. The system consists of a loop driver, a loop pad, a 
microphone and a wall holder. Installed in a reception desk or counter, the system gives 
hearing hearing aids users the possibility to communicate with the staff behind the desk 
with greatly enhanced speech perception. 

The system is always activated and no special preparations have to be undertaken, 
neither by the hearing impaired nor by the staff. The only requirement for the hearing aids 
user is to put their hearing aids in T-position and for the staff to speak normally into the 
microphone.

All Univox® drivers have a very high output current capability resulting in powerful and 
secure products fulfilling existing standards, IEC 60118-4. 

Thank you for having chosen a Univox® product. 

Univox CTC-120

Univox CLS-1 loop driver 
Univox 13V microphone for glass/wall 
Loop pad, Sign/label with T-symbol 80 x 73 mm
Wall holder for loop driver
Part No: 202040A (EU)   202040A-UK   202040A-US   202040A-AUS

Univox CTC-121

Univox CLS-1 loop driver 
Univox M-2 goose neck microphone
Loop pad, Sign/label with T-symbol 80 x 73 mm
Wall holder for loop driver
Part No: 202040B (EU)   202040B-UK   202040B-US   202040B-AUS

Summary of Contents for Univox CLS-1













Reviews: