73
8.4.3 TCP/IP
You can configure the print server to automatically get IP
from DHCP server or manually specify static IP. The print
server also has a built-in DHCP server. You can enable this
DHCP server and let it manages IP for you.
If you need the print server to automatically get an IP from
DHCP server, select
“
Enable Obtain TCP/IP Settings
Automatically (Use DHCP/ BOOTP)
”
. You also can select
“
Disable Use the following TCP/IP Settings
”
to manually
assign
“
IP Address
”
,
“
Subnet Mask
”
and
“
Gateway
”
for the
print server.
You can enable/disable or set auto for the print server
’
s
DHCP server. The DHCP server is disabled by default. If
the DHCP Server is enabled or set Auto, you have to
assign a range of IP addresses here. Fill in the
“
Start IP
”
,
“
Range
”
,
“
DNS
”
,
“
Subnet Mask
”
and
“
Gateway
”
, and the
print server will assign a unique IP for each client. Note
that when
“
Auto
”
is selected, the DHCP Server of the print
server will be enabled only when there is no other DHCP
Server within the network.