Edimax nLite 3G-6200N, User Manual

Page: 86 / 119

84
Gateway destination LAN. This is the IP of the neighbor router
that this router should communicate with on the path to
the destination LAN.
Hop Count
The number of hops (routers) to pass through to reach
the destination LAN.
Interface The interface that go to the next hop (router).
Add a Rule
Fill in the "Destination LAN IP", "Subnet Mask”, “Default
Gateway”, "Hop Count" and "Interface" of the rule to be
added and click "Add". Then this static routing rule will
be added to the "Static Routing Table" listed below. If
you found any typo before adding it and want to correct
it, just click "Reset" and the fields will be cleared.
Remove a
Rule
If you want to remove some routing rules from the
"Static Routing Table", select the rules you want to
remove in the table and click "Delete Selected". If you
want remove all rules from the table, just click "Delete
All" button. Click "Reset" will clear your current
selections.
Click <Apply> at the bottom of the screen to save the configurations.
You can now configure other advance sections or start using the router.