manualshive.com logo in svg

Edimax nLite 3G-6200N, User Manual

Share
Download
Edimax nLite 3G-6200N User Manual Download Page 107

 

105 

 

 

 

Parameters  

Description 

Firmware 

Upgrade 

This tool allows you to upgrade the broadband router’s 
system firmware. To upgrade the firmware of your 
broadband router, you need to download the firmware 
file to your local hard disk, and enter that file name and 
path in the appropriate field on this page. You can also 
click the browse button to locate the firmware file on 
your PC.   
 

 
After you selected the new firmware file, click <Apply> at the bottom of 
the screen to start the upgrade process. (You may have to wait few 
minutes for the upgrade to complete). Once the upgrade is complete 
you can start using the router. 

 

Warning: When upgrading firmware, be sure not to switch the computer 
off, or restart your computer. 
 

4.3 Reset 

You can reset the router’s system when there’s something wrong with 
the router. The reset function will reboot your router. 
 

 

Summary of Contents for nLite 3G-6200N
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands