Edimax IC-9000, User Manual

Page: 95 / 118

95
Sender E-Mail
Address
Specify the email address of email sender.
SMTP Server
Specify the IP address or host name of the SMTP server you wish to
use. For most of ISPs they will only allow its subscriber to use their
SMTP server, if you don’t know which SMTP server you should use,
please refer to the setting of your email software or ask your ISP /
network administrator.
SMTP port
Specify the port number of the SMTP server you wish to use here.
By default (and the setting of most of SMTP servers) it’s ‘25’.
SMTP Auth
Select ‘Enable’ if your SMTP server requires authentication, select
‘Disable’ if it’s not required. If you don’t know if your SMTP server
requires authentication, please refer to the setting of your email
software or ask your ISP / network administrator.
SMTP Account
Input the SMTP account (username) of your SMTP server here. In
most cases, it’s the same with your POP3 username (the one you
used to receive email). Please refer to the setting of your email
software or ask your ISP / network administrator if you’re not sure
about this.
SMTP
Password
Input the SMTP password of your SMTP server here. In most cases,
it’s the same with your POP3 password (the one you used to receive
email). Please refer to the setting of your email software or ask your
ISP / network administrator if you’re not sure about this.
OK
Save settings in this tab.
Cancel Discard all settings in this tab.