Edimax IC-3110 User Manual Download Page 106

Page: 106 / 185

ONFIGURING THE

URVEILLANCE

OFTWARE

SER

NTERFACE

VERVIEW

Click the

IPCam Surveillance Software

icon on the

desktop, quick launch bar or start menu to start the network

camera surveillance software.

ITEM

DESCRIPTION

ITEM

DESCRIPTION

Scan

Video Display Area

Language

The images from all connected

cameras will be displayed here.

Select a language from this drop-

down menu to change the display

language.

Changes the camera image dis-

play layout. Click the display layout

button to change the current lay-

out. There are 8 display layouts.

Click this button to switch to full

screen mode. Press the

ESC

key

to quit full screen mode.

Zoom Out

Click this button to automatically

cycle through the images of all

connected cameras. Click this but-

ton once to activate the scan fea-

ture, the scan icon turns blue. Click

again to stop scanning.

Zoom out. This feature is only

available for supported cameras.

Display Layout

Zoom In

Zoom in. This feature is only avail-

able for supported cameras.

Full Screen

3-62

Summary of Contents for IC-3110


























































































































































































Search results

Summary of Contents for IC-3110

Reviews:

Brands by name

Popular brands

Edimax IC-3110, User Manual

Search results

Summary of Contents for IC-3110

Reviews:

Brands by name

Popular brands