16
Mail Server: IP address/Domain name of mail server for sending mail.
IP Information
IP Address: necessary for network identification. The default value is 192.168.2.3.
Subnet mask: Used to determine if the destination is in the same subnet. The default
value is “255.255.255.0.”
Default Gateway: The router used to forward frames to destinations in a different subnet.
Invalid router settings may cause the failure of transmissions to a different subnet.
DNS Server: Domain name server that translates names to IP addresses.
Video Port Number: Video stream port number.
Control Port Number: Can be set to other than the default port 80. When the
administrator changes the HTTP port from 80 to 8080, users must type
http://192.168.2.3:8080
in the Web browser bar.
Camera Name: the name for identify physical camera.
Firmware version: Show the version of firmware
Change Password
Old Password: Enter the old password
New Password: Enter a new password
Confirm Password: Re-enter the new password for confirm.
Setting Wizard
Click the button will auto configures the new camera and assign into camera viewer. Please
reference chapter 5.
8. WEB
Control
You can use the WEB browser to connect the camera for viewing or setting, but the
performance is not well from WEB browser, so we suggest the material is only for
troubleshooting.
Type
http://192.168.2.3
in the Web browser bar. (192.168.2.3 is the default value, you can
type any address or domain name if you have configured well.)
