Default Gateway
The Gateway is used to forward frames to destinations in a
different subnet on the Internet. The Gateway setting must match
the values used by the PCs on your LAN.
DNS Server
DNS Server (Domain Name Server) that translates names to IP
addresses. Set the same values as the PCs on your LAN.
Video Port
The Video Port is used to transmit or receive the video streaming
in the network. The default port setting is “4321”. If you want to
view the video from the camera, the port setting should be correct.
Web Port
This camera support web connection, the default web port is 80.
Since the web server may use port 80, you can use a different
port for the camera. If you change the web port from 80 to 8080,
you must type
http://192.168.2.3:8080
to connect the camera
through the web browser.
UPnP
Enable/Disable
Enable or disable UPnP function of the camera.
Apply
When you finish the “UPnP” setting, click “Apply”.
DDNS Service
Enable/Disable
Enable or disable DDNS function of the camera.
Provider
Several companies provide DDNS service. This camera supports
the service from DynDNS who is one of the DDNS providers.
Domain Name
The domain name given by DynDNS is
“registername.dyndns.com”. Enter the domain name that you
register for the camera from DynDNS web site.
account
Enter the login name for the DDNS service.
Password
Enter the password for the DDNS service.
Apply
When you finish the “DDNS Service” setting, click “Apply”.
Camera Information
Camera Name
The default camera name is “IPCamera_MJPEG”. It is
recommended to name a meaningful name for the camera.
Firmware
Display the current firmware version of the camera.
Apply
When you finish the “IP Setting”, click “Apply”.
Maintenance
Apply
To reset the camera, click “Reset to Defaults”. Then, follow the
instruction of the screen to complete the process.
37
