30
connection quality is better.
Mode
Display the wireless modes include 11b, 11b/g or
11b/g/n or 11n only of the access points.
Refresh
Click this button to refresh the table.
Connection
Select an access point and click this button to
choose the network. The SSID name of the access
point you have selected will be displayed in the
Main SSID in the Basic Setting page.
2-4-3 AP Bridge-Point to Point Mode
In this mode, this wireless access point will connect to another wireless
access point which uses the same mode, and all wired Ethernet clients of
both wireless access points will be connected together. You can use this
mode to connect a network to another network which is physically
isolated.
Please note that when you set your access point to this mode, it will not
accept regular wireless clients anymore.
When you select ‘AP Bridge-Point to Point’, the following options will
be displayed:
Here are descriptions of every setup item:
Band
Please select the wireless band you wish to use. By
selecting different band setting, you’ll be able to
allow or deny the wireless client of a certain band.
