Edimax EW-7208APC, User Manual, Page: 91 / 199

Subnet Mask Input the subnet mask assigned by your ISP here.
Default Gateway
Address Input the default gateway assigned by your ISP
here. Some ISPs may call this “Default Route”.
MAC Address If your ISP filters access by MAC addresses, enter
your computer’s MAC address here. Click “Clone
MAC” to automatically enter your computer’s MAC
address.
DNS Address Select “Obtain an IP address automatically” or “Use
the following IP address”. Check with your ISP if you
are unsure.
DNS Address 1,2 & 3 Enter the DNS address(es) assigned by your ISP
here.
Enable Dual-WAN
Access Enable/disable dual WAN access. When you enable
dual WAN access, select an IGMP source and enter
a “Host Name” and “MAC Address”.
User ID Input the user name assigned by your ISP here.
Password Input the password assigned by your ISP here.
L2TP Gateway Input the L2TP gateway assigned by your ISP here.
Connection ID Specify a reference name/ID for the connection.
MTU Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1392.
Connection Type Specify a connection type:
1.
“Continuous”: Connected all the time.
2. “Connect on Demand”: Connect when you
initiate an Internet connection.
3. “Manual”: Connect/disconnect manually using
the “Connect” and “Disconnect” buttons.
Idle Time Out Specify the amount of time the router waits before
shutting down an idle connection. Only available
when “Connect on Demand” (above) is selected.