Edimax EW-7208APC, User Manual, Page: 124 / 199

Local Port Range Enter the port range to activate the QoS rule.
Enter a single port number e.g. 110 or a
range of port numbers e.g. 110-120
Remote IP Address Enter the remote IP address range which will
activate the QoS rule.
Enter a starting IP address in the left field
and the end IP address in the right field to
define a range of IP addresses; or enter an IP
address in the left field only to define a single
IP address.
Remote Port Range Enter the remote port range to activate the
QoS rule.
Enter a single port number e.g. 110 or a
range of port numbers e.g. 110-120
Traffic Type Select traffic type as an alternative to
specifying a port range above.
Protocol Select a “TCP” or “UDP” protocol type.
Save Click ‘add’ button to add a new QoS rule
(detailed instructions will be given below).
QoS rule entries will be listed in the “Current QoS Table” as shown below.
Select a rule using the “Select” checkbox.
When using the “Edit” button only one rule can be selected each
time.
QoS rules will be processed in the order that they are listed i.e.
the rule at the top of the list will be applied first, and then the
second rule etc. The order can be adjusted using the “Move
Up/Down” buttons.
Edit Edit a selected rule.
Delete Selected/
Delete All Delete selected or all entries from the
table.
Move Up/Down Move selected rule up or down the list.