Wireless LAN Access Point Configuration
Chapter 4 Web Configuration
4.1 Getting
Started
This Gaming Adapter provides web-based configuration tool allowing you to
configure from wired or wireless stations.
* The Web Configuration only when you have already set static IP to the
Gaming Adapter through Gaming Adapter Setup Wizard. Follow the
instructions below to get started configuration.
From Wired Station
1.
Make sure your wired station is in the same subnet with the Gaming Adapter.
The default IP Address and Subnet Mask of the Gaming Adapter is:
Default IP Address: 192.168.2.1
Default Subnet: 255.255.255.0
Configure your PC to be in the same subnet with the Access Point.
1a) Windows 95/98/Me
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2.
Double-click
Network
icon. The
Network
window will appear.
3.
Check your list of
Network Components
. If TCP/IP is not installed, click the
Add
button to
install it now. If TCP/IP is installed, go to
step 6
.
4.
In the
Network Component Type
dialog box, select
Protocol
and click
Add
button.
5.
In the
Select Network Protocol
dialog box, select
Microsoft and TCP/IP
and then click the
OK
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
6.
After installing TCP/IP, go back to the
Network
dialog box. Select
TCP/IP
from the list of
Network Components
and then click the
Properties
button.
7.
Check each of the tabs and verify the following settings:
•
Bindings
: Check
Client for Microsoft Networks
and
File and printer sharing for
Microsoft Networks
.
•
Gateway
: All fields are blank.
20
