TROUBLESHOOTING
1.
Power LED is not lit.
Check if the power cord is properly connected to the external power adapter and
the power source. Make sure the DC power jack is firmly plugged into the power
socket of the switch.
2.
Link/Activity (LNK/ACT) LED is not lit when connected to devices.
-
Ensure that the network device attached to the switch is switched on.
-
Check the network cable; ensure it is properly connected to the switch and the
network device.
-
Check the network cable; ensure the UTP cable complied with EIA/TIA 568 and
Category 5 specifications.
[!] Contact your dealer if problems persist.
Summary of Contents for ES-1008PH V2
Page 1: ...ES 1008PH V2 GS 1008PH V2 Quick Installation Guide 02 2017 v1 0...
Page 7: ......
Page 12: ......
