Edimax BR-6675nD, User Manual

Page: 110 / 150

109
rule. If only one port is involved, input a single
number here (1 to 65535); if multiple ports are
involved, input starting / ending port number in
x ‐ y format (like 10 ‐ 20).
Traffic Type If you’re creating a QoS rule for a specific type
of traffic, you can select it from this menu and
you don’t have to input port range above.
Protocol Select the protocol type here (TCP or UDP).
Add Click ‘add’ button to add a new QoS rule
(detailed instructions will be given below).
Reset If you want to erase all values you just entered.
Click ‘Reset’
Edit If you want to modify the content of a specific
rule, please check the ‘select’ box of the rule
you want to edit, then click ‘Edit’ button. Only
one rule should be selected a time!
Delete Selected You can delete selected rules by clicking this
button. You can select one or more rules to
delete by check the ‘select’ the box of the
rule(s) you want to delete a time. If the QoS
table is empty, this button will be grayed out
and cannot be clicked.
Delete All By clicking this button, you can delete all rules
currently listed in the QoS table. If the QoS
table is empty, this button will be grayed out
and cannot be clicked.
Move Up Move selected rule up. First QoS rule will be
proceed first, so you can move higher priority
rules up.
Move Down Move selected rule down.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 60 seconds and the broadband router will stop responding (this is normal