PPTP Auto Dialup
•
Auto Dialup
–To enable or disable auto dialup for a PPTP connection. If
you decide not to use auto dialup or auto disconnect, then you have to
connect/disconnect manually.
•
Disconnect After Idle
–To decide the timeout for disconnecting when
there is no traffic on the connection. Enter
-1
to keep the connection
always
alive
. Enter
0
to enable 'dial on demand by trigger'.
•
Echo Time
–To determine how often an Echo request is sent to the
PPTP server. Normally, leave this setting at its default value.
•
Echo Retry
–To determine the maximum number times that the Echo
request is allowed to be sent to the PPTP server until a response is
received. Normally, leave this setting at its default value.
Connection
Status
This displays the current connection status for PPTP
Page 27
Summary of Contents for BR-6624
Page 1: ...BR 6624 Load Balancing Router Manual...
Page 2: ......
