11
6: Click
OK
to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router
’
s DHCP server.
Note
: Please make sure that the Broadband router
’
s DHCP server is the only DHCP server
available on your LAN.
Once you
’
ve configured your PC to obtain an IP address automatically, please proceed to
Step 3.
2d) Windows NT
1: Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2: Double-click
Network
icon. The
Network
window will appear. Select the
Protocol
tab from
the
Network
window.
3: Check if the
TCP/IP Protocol
is on your list of
Network Protocols
. If TCP/IP is not
installed, click the
Add
button to install it now. If TCP/IP is installed, go to
step 5
.
4: In the
Select Network Protocol
window, select the
TCP/IP Protocol
and click the
Ok
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the
Network
window. Select
TCP/IP
from the list of
Network Protocols
and then click the
Properties
button.
6: Check each of the tabs and verify the following settings:
•
IP Address:
Select
Obtain an IP address from a DHCP server
.
•
DNS:
Let all fields are blank.
•
WINS:
Let all fields are blank.
•
Routing:
Let all fields are blank.
