Edimax AR-7286WnA, User Manual

Page: 55 / 92

55
Field Description
Connection Setting
Connection
You can choose Always On (Recommended) ,
Connect On-Demand or Connect Manually .
TCP MSS Option
You can set a TCP MSS value. The range is from 100
to 1452. The default is
1400 .
IP Common Options
Default Route You can enable or disable default route.
IPv4 Address
Get IP Address You can choose Static or Dynamic .
Static IP Address
You can enter the IP address for dial-up, which is
provided by your ISP.
IP Subnet Mask The default is 255.255.255.255 .
Gateway
You can enter the gateway IP for dial-up, which is
provided by your ISP.
TCP MTU Option
You can set a TCP MTU value. The range is from 100
to 1500. The default is 1492 .
NAT
Select whether to enable Network Address
Translation (NAT) function. If you do not enable NAT,
you must add a route on the uplink equipment,
otherwise Internet access will fail. Normally NAT is
enabled.
Dynamic Route You can select RIP1 , RIP2-B or RIP2-M .
Direction You can select None , Both , IN Only or OUT Only .
Multicast
IGMP (Internet Group Multicast Protocol) is a
session-layer protocol used to establish membership
in a multicast group. The ADSL Router supports both
IGMP version 1 (
IGMP v1 ) and IGMP version 2 ( IGMP
v2 ). Select Disabled to disable it.
IPv6 Address
DHCP IPv6 Provide address assignment to hosts to include