47
Field
Description
255. Enter the correct VPI provided by your ISP. By default,
VPI is set to
8
.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP. By
default, VCI is set to
35
.
Connection
Type
You can select
LLC
or
VC-Mux
. In this example, the
encapsulation mode is set to
PPPoE LLC
.
After setting, click
NEXT
, the page as shown in the following figure appears.
Click
BACK
to modify the settings.
Click
NEXT
to save the settings.
Click
EXIT
to cancel the settings.
Note
:
After you saving the settings in the
Quick Start
page, you can view this
wan connection settings in the
Interface Setup
>
Internet
page.
5.4.
Interface Setup
In the navigation bar, click
Interface Setup
.
The
Interface Setup
page that is
displayed contains
Internet
,
LAN
and
Wireless
.
5.4.1.
Internet
Choose
Interface Setup
>
Internet
. The
Internet
page that is displayed
contains
ATM VC
,
Qos
,
IPv4/IPv6
and
Encapsulation
.
Click
Internet
pane, the page shown in the following figure appears. In this
page, you can configure the WAN interface of your router.
