48
Channel
It is the radio channel used by the wireless LAN. All
devices in the same wireless LAN should use the same
channel. Please select the country you are located and
designate a channel that the router will use. For product
available in the USA/Canada market, only channel 1~11
can be operated. For product available in Europe market,
only channel 1~13 can be operated. Selection of other
channels is not permitted. If you want to let the router
automatically to find an available channel with the
highest signal strength, please select
“Auto”. The auto-
selective channel will be shown in the
“Current Channel”
field.
Beacon Interval
The interval of time that this wireless router broadcast a
beacon. Beacon is used to synchronize the wireless
network. The range for the beacon period is between 20
and 1000 with a typical value of 100 (milliseconds).
RTS/CTS Threshold
When the packet size is smaller than the RTS threshold,
the wireless router will not use the RTS/CTS mechanism
to send this packet. The range is from 1500 to 2347.
Fragmentation
Threshold
Fragment Threshold specifies the maximum size of
packet during the fragmentation of data to be transmitted.
If you set this value too low, it will result in bad
performance. Enter a value from 256 to 2346.
DTIM
Determines the interval the Access Point will send its
broadcast traffic. The range is from 1 to 255 and the
default value is 3 beacons.
Wireless Mode
802.11b
– It only allows 802.11b wireless network client
to connect this router (maximum transfer rate 11Mbps).
