EdilKamin MYA ECO, Installation, Use And Maintenance Manual, Page: 5 / 24

- 5
-
ENGLISH
CHARACTERISTICS
• ELECTRONIC CIRCUIT BOARD
• ELECTRONIC EQUIPMENT
SERIAL PORT
The Dealer can install an optional on the AUX outlet for controlling the process of
switching on and off (e.g. telephone remote, local thermostat), located at the rear oh the
stove. Can be connected via special optional trestle (code 640560).
BACKUP BATTERY
A backup battery is found on the control board (3-Volt CR 2032 battery). Its malfun -
ction is indicated with the following messages (not considered a defect but due to
normal wear-and-tear): “Battery check”.
For more detailed information, please contact the DEALER who has performed the first
1st ignition.
FUSE *
two fuses are inserted in the socket with
switch, located on the back of the stove,
one of which operational * and the other
is held in reserve ** .
LEONARDO
®
is a combustion safety and control system which allows optimal performance in all
conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke
temperature.
The detection of and subsequent optimisation of these two parameters is continuous in order to correct
operation anomalies in real time.
The LEONARDO
®
system offers constant combustion, automatically regulating the draft based on the
characteristics of the chimney flue (bends, length, shape, diameter, etc..) and environmental conditions
(wind, humidity, atmospheric pressure, installations at high altitude, etc.).
The standards for installation must be respected.
LEONARDO
®
system is also able to recognise the type of pellets and automatically djust the flow mo -
ment by moment to ensure the required level of combustion.
+ ---
Legenda:
AUX = ON-OFF Remoto
RPM FUMI =Sensore giri Motore esp. fumi
IN T°J = Input Termocoppia "J"
TM 150°C = Termostato di sicurezza
SOS = Accensione e/o spegnimento di emergenza/cambio potenza
D A B C
H L
G
F
F
M
N
R
P
smoke rpm
flow sensor
thermocouple
sensor air
ambient (optional)
Vacuum gauge
Reading
points
backup
battery
lithium
CR2032
Smoke expulsion motor
ingnition element
M SCREW
230 vac power supply
ventilation
reading points
combustion chamber
vacuum meter
* **