- 20
-
INST
ALLA
TION
IMPORTANT:
When assembly has been completed, the installer must apply
the TECHNICAL RATING PLATE supplied to the casing, so that it
is legible when the appliance is installed (for example, on one of
the side panels as shown in the figure).
- Hold the cam in position by hand, remove the protector (9)
and replace it with the hexagonal rod (10)
- Secure the rod (10) by tightening the screw (11)
- Tighten the rod (12) into the threaded hole on the door (13)
and secure it, using the nut (14), in a horizontal position
with the end facing to the right
- Remove the hook from the chain (15) and attach it to the
rod (12).
NOTE
Do not attach the chain (15) to the rod (12).
12
15
14
13
7
9
10
10
11
Summary of Contents for ENERGY 21
Page 3: ...3 GENERAL...
Page 31: ......