26
ENGLISH
DRAWER AND VENTILATION KIT
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
1.
1. unscrew the metal cover on the top part of the frame
unscrew the metal cover on the top part of the frame
2.
2. replace the metal cover with the pre-assembled Kit (1), and screw it on the sides
replace the metal cover with the pre-assembled Kit (1), and screw it on the sides
3.
3. electrically connect the fan to the circuit board as shown on the high-voltage terminal board to the side (poles
electrically connect the fan to the circuit board as shown on the high-voltage terminal board to the side (poles
7,8,9, Line, Earth, Neutral respectively)
7,8,9, Line, Earth, Neutral respectively)
4.
4. position the snap fitted grille and ceramic assembly and secure it frontally with the self-tapping screw provided
position the snap fitted grille and ceramic assembly and secure it frontally with the self-tapping screw provided
5. the fan must then be activated by an Edilkamin Assistance Centre, using the reserved settings menu.
1
2
VERSION WITH FRONTAL VENTILATION AND DRAWER (3)