background image

                                                                                                                              7 

 

Fully charged                                      Low battery level 

 

When used, if only red indicator blinks and with a prompt tone per 5 minutes, it indicates the headphone is in 
low battery level and please use it after fully charged.

 

Red light steady lit = charging        Blue light steady lit = fully charged

 

Charging time: about 3 hours for a full charging 

 

 

7. Indicator 

Indicator Headphone 

status 

Red and blue light blink alternately 

Pairing 

Blue light blinks once per 8 seconds 

Unconnected with device 

Blue light blinks twice per 5 seconds 

Connected with device 

Red light instead of blue light blinks 

Low battery level 

 

 

8. Restore to factory settings 

Turn the headphone off and connect USB to charge, meanwhile press and hold the volume up key and the 
multifunction key until blue light blinks rapidly, it will restore to factory settings. 

 

 

Note

: After restoring to factory settings, pairing list of the headphone will be cleared. When powered on 

again, the headphone will auto-enter pairing mode; if needs to connect with certain device, please 
re-pair it with the headphone. 

 

Summary of Contents for W845NB













Reviews: