3
■
How to operate the headphone
1. Power ON/OFF
Function
Operation
Indicator
Power ON
Press and hold the multifunction key for 3
seconds
Blue right will be lit for 1 second
Power OFF
Press and hold the multifunction key for 4
seconds
Red right will be lit for 1 second
Note: If not connected to any device within 10 minutes after powered on, the headphone will auto power off to
save power.
2. Pairing and Connection
Connect with Bluetooth phone
The steps are as below:
●
Enter pairing mode: when turned off, press and hold the multifunction key for 5 seconds (when turned on
and unconnected, press and hold for about 1.5 seconds) until the red and blue indicator blinks alternately
and rapidly.
●
Keep the headphone and Bluetooth phone within one meter, the closer the better;
Set Bluetooth phone to search for and pair with “EDIFIER W845NB”;
●
The blue indicator blinks slowly, then the connecting is successful.
Note:
●
Pin code for connection is “0000” if needed;
●
After pairing is complete, the headphone will automatically connect to the last connected device when used
next time;
●
The pairing mode will last for 2 minutes, if not paired with any device within 2 minutes the headphone will
automatically switch to standby mode.
