Bluetooth Input
Pairing
1. Turn on speaker and switch to Bluetooth mode by pressing the SOURCE button on the remote control or press the
volume dial on the active speaker until the indicator LED light shows (Bluetooth)
2. Go to setup on your source devices (mobile phones, tablets, etc.) and search for nearby Bluetooth devices, you will
find “EDIFIER S880DB” in the list.
3. Pair your device with “EDIFIER S880DB”.
4. Play audio tracks on your device and adjust the volume to a desired level.
5. To disconnect Bluetooth, press and hold the SOURCE button on the remote control for about 2 seconds.
Note:
1. Bluetooth on the product can be searched and connected only when speaker is ON and switch to the Bluetooth input.
When the speaker is switch to other audio inputs, the Bluetooth connection will be disconnected. When switched to
Bluetooth input, the speaker will try to connect the last connected Bluetooth source device.
2. Bluetooth connectivity and compatibility may be different among different source devices, depending on the software
version of source devices.
3. To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports A2DP and AVRCP profile.
4. PIN code for connection is “0000” if needed.
EDIFIER S880DB
SOURCE
or
11
English
