Page 7
Specifications
Power output: RMS 7.5W × 2 (treble) + 7.5W × 2 (mid-range) + 30W (bass) (THD+N=10%, f0=1KHz)
Signal to Noise ratio: ≥85 dBA
Distortion: ≤0.5%
Frequency response: 3.8KHz~20KHz
Input sensitivity: AUX: 1000 mV ± 50 mV, iPod: 850 mV ± 50 mV
Input type: Bluetooth / iPod / AUX
Bass unit: 5¾ inch (Φ148mm), magnetically shielded, 6Ω
Midrange unit: 2¾ inch (Φ70mm), magnetically shielded, 4Ω
Tweeter unit: Φ19mm silk dome, magnetically shielded, 4Ω
Dimension: 420 mm x257 mm x244 mm (
W×H×D
)
Net weight: 4.8kg
Gross weight: 6.2kg
Page 8
Troubleshooting
●
Not all speakers function:
Please first check if the speaker wires are connected securely; then check if the Line-in connectors are reversed; check also if the
audio source is at fault.
●
System does not work at all
1. Please check if power is connected, and if the wall outlet is switched on.
2. Please check if the system is in standby.
3. Please check if the master volume is turned to minimum.
4. Please check if the audio input cable is connected correctly.
5. Please check if there is signal from audio source.
●
Noise coming from speakers
Amplifier circuitry of this product generates little noise, while the background noise of some VCD/DVD player or computer sound card
are too high. Please keep the system in active mode and remove the audio source, if no sound can be heard at 1 meter away from
the system, then there is no problem with this product.
iPod
iPhone
. Connect iPod /iPhone (MP3 or WMA audio format) into the dock.
. Press
SOURCE
to select iPod input, the LED under the iPod/iPhone dock is red.
. Play your audio device.
. Press & hold
to set system to standby mode.
. Press & hold
again to wake up system, press
to play music.
. Press
SOURCE
to select AUX input, the LED under the iPod/iPhone dock is green.
. Play your audio device.
. Adjust the volume to a comfortable level.
. Press & hold
to set system to standby mode.
. Press & hold
again to wake up system
AUX input
iPod input
