background image

 

 

© 2006 Edgewater Networks, Inc.  

Edgewater Confidential, All Rights Reserved.  

This document is protected by copyright and distributed under licenses restricting its use, copying, 
distribution, and decompilation. No part of this document may be reproduced in any form by any means 
without prior written authorization of Edgewater Networks, Inc. Documentation is provided “as is” without 
warranty of any kind, either express or implied, including any kind of implied or express warranty of non-
infringement of the implied warranties of merchantability or fitness for a particular purpose.  

EdgeMarc is a trademark of Edgewater Networks, Inc. in the United States and other countries. Any other 
trademarks appearing in this manual are owned by their respective companies.  

Export Notice  

This product, software and related technology is subject to U.S. export control and may be subject to export 
or import  regulations in other countries. Purchaser must strictly comply with all such laws and regulations. A 
license to export or  re-export may be required by the U.S. Department of Commerce.  

Regulatory Compliance  

FCC Part 15, UL, CE, FCC Part 68 and Industry Canada.  

INDUSTRY CANADA (IC) NOTICE  

NOTICE:

 This equipment meets the applicable Industry Canada Terminal Equipment Technical 

Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration 
number signifies that registration was performed based on a Declaration of Conformity indicating that 
Industry Canada technical specifications were met. It does not imply that Industry Canada approved the 
equipment.”  

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of 
the local telecommunications company. The equipment must also be installed using an acceptable method 
of connection. The customer should be aware that compliance with the above conditions may not prevent 
degradation of service in some situations.  

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any 
repairs or alterations made by a user to this equipment, or equipment malfunctions, may give the telephone 
communications company cause to request the user to disconnect the equipment.  

Users should ensure for their own protection, that the electrical ground connections of the power utility, 
telephone lines and internal metallic water pipe system, if present, are connected together. This precaution 
may be particularly important in rural areas”.  

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate 
electric inspection authority, or electrician, as appropriate.”  

WARRANTY AND REPAIR SERVICE CENTER:  
 
Interwork Technologies  
Bill Dunnion  
[email protected] 
+1 (613) 288-8872 

This Class (A) digital apparatus complies with Canadian ICES-003. 

Licensing  

Use of this product is subject to Edgewater Networks Software License Agreement.  

Portions of this product include software sponsored by the Free Software Foundation and are covered by 
the GNU GENERAL PUBLIC LICENSE.  

See the 

VOS for EdgeMarc User Manual

 for more information regarding licenses.  

Summary of Contents for EdgeMarc 4500 Series























Reviews: