4508T4 Converged Network Appliance Installation Guide
8
Back Panel
Figure 2: 4508T4W Back Panel
Name
Description
A
Power Connector
Accepts the plug from the supplied power cord to connect the unit
to an AC power source
B
10/100 Mbps LAN
Ports
Local Area Network (LAN) ports to connect the IP phones or an
Ethernet switch. Unit can also be configure through any of these
ports using the web interface
C
USB Ports
2 x USB ports (Not Used)
D
Ethernet WAN
Port
Can be used as an alternative to the T1/E1 WAN ports. This port
is typically used when connecting the 4508T4 to an existing T1/E1
WAN router, cable or xDSL modem.
