Page 2 of 7
Before You Start
Please read this guide thoroughly as it describes the basic installation of
the device. Additional configuration needed to deploy the device in a
specific environment can be performed with the help of online help.
This guide also provides an example of a typical 4610W device
deployment that can be used as a guideline for your installation.
Requirements for Installation
•
A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice
•
At least one Ethernet cable
•
Following information supplied by the VoIP Service Provider
o
IP address of the WAN interface
o
if T1 is being used for WAN connection then:
!
T1 frame format
!
Layer 2 protocol such as PPP, Frame Relay/DLCIs, HDLC,
etc.
o
IP address of the Softswitch