background image

 

 

 
Important Safety Information 

 

 

Improper handling can cause serious damage to the EdgeStar Beverage Cooler and / or injury 
to the user. This Beverage Cooler is designed for domestic indoor use only. 

Do not use the 

unit for industrial or commercial use.

  Any other use may invalidate the warranty. Please 

review the ratings label located on the rear panel of the unit for electrical and other technical 
data related to this unit. The unit must be used in a properly grounded wall outlet.  

 

 

Please read and follow the safety information listed below to reduce the risk of fire, 
electric shock, or injury.

  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 Electrical Safety 

 

  Do not exceed the power outlet ratings.  

  It is recommended the Beverage Cooler be connected on its own circuit.  

  The unit must be installed in accordance with state and local electrical codes.  

  A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the 

National Electrical Code and local codes and ordinances is required.   

  Use outlets that cannot be turned off by a switch or pull chain. 

  Always turn the unit off and unplug it from the outlet when cleaning. 

  Unplug the unit if it is not going to be used for an extended period of time. 

  Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose 

socket.  

  Be sure the Beverage Cooler is properly grounded. 

  Never plug or unplug the unit with wet hands. 

  Do not bypass, cut, or remove the grounding plug.  

  Do not use extension cords or power strips with this unit. You may need to contact your 

electrician if it is necessary to use a longer cord or if you do not have a grounded outlet. Do not 
modify the power cord’s length or share the outlet with other appliances.  

 

Do not start or stop the unit by switching the circuit’s power on and off. 

  If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician. 

  Never repair the unit while it is plugged in. 

  Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, 

and contact customer service. 

  Do not remove any part of the casing unless you are instructed to do so by an authorized 

technician. 

  You should never attempt to repair the unit yourself. 

  Contact customer service for service options if the unit needs service. 

Summary of Contents for bci3640778























Reviews: