4
MOUNTING GUIDELINES
Your EDGE amplifier is designed with a swift installation routine in mind.
Please mount the amplifier in a dry location on a solid surface.
NEVER mount the amplifier upside down as this will cause the amplifier to over heat and will eventually
damage the amplifier.
Before fixing the amplifier in place please ensure that there is sufficient air flow around the exterior of
the casing, at least two inches is sufficient.
NOTE:
When using high level input it is not necessary to connect the remote turn on wire
Chassis ground
Remote turn on
Fuse close to battery
Battery
POWER INPUT
LOW LEVEL INPUT
HIGH LEVEL INPUT
