background image

3

LIMITED WARRANTY

All EDGE products carry a full 12 month warranty, valid from the date of the original receipt and 

proof of purchase. In order to validate this warranty, the online warranty card should be completed 

within seven days of the original purchase date. The original receipt and packaging should be re-

tained for this twelve month period. If the product develops a problem any stage during the warranty 

period, it should be returned to the point of purchase in it’s original packaging, and complete with no 

items missing. If the store is unable to repair the product it may have to be returned to EDGE. 

A full description of EDGE warranty information can be found on our website:

www.edgecaraudio.co.uk/warranty

WHAT IS NOT COVERED

• Damage to product due to improper installation.

• Subsequent damage to other components.

• Damage caused by exposure to moisture, excessive heat, chemical cleaners and / or UV 

  radiation.

• Damage through  negligence, misuse, accident or abuse. Repeated returns for the same fault may   

  be considered abuse.

• Any cost or expense related to the removal and / or re-installation of the product.

• Damage caused by amplifier clipping or distortion.

• Items repaired or modified by any unauthorised repair facility.

• Return shipping on non defective items.

• Products returned without a returns authorisation number.

• Damage to product due to use of sealant.

INTERNATIONAL WARRANTY

Contact your international EDGE dealer or distributor concerning specific procedure for your coun-

try’s  warranty policies.

WARNING

EDGE Equipment is capable of sound pressure levels that can cause permanent damage to your 

hearing and those around you. Please use common sense when listening to your audio system and 

practice safe sound.

COPYRIGHT

All content included in this manual such as text, graphics, logos, icons, images and data, are the property of Midbass Distribution Limited t/a EDGE audio 

(herein referred to as “EDGE”, “us” or “we”) and its affiliate or their content and technology providers, and are protected by United Kingdom and Interna-

tional copyright laws. All rights reserved. EDGE and all stylised representations of product names, or the abbreviations of product names, as logos are all 

trademarks of EDGE. Graphics and logos are trademarks or trade dress of EDGE audio or its subsidiaries. EDGE’s trademarks and trade dress may not be 

used in connection with any product or service that is not EDGE’s, in any manner that is likely to cause confusion among customers or in any manner that 

disparages or discredits EDGE. All other trademarks not owned by EDGE or its subsidiaries that appear in this manual are the property of their respective 

owners, who may or may not be affiliated with, connected to, or sponsored by EDGE or its subsidiaries.

TO THE FULLEST EXTENT PERMITTED AT LAW, EDGE IS PROVIDING THIS MANUAL AND ITS CONTENT ON AN “AS IS” BASIS AND MAKES NO 

(AND EXPRESSLY DISCLAIMS ALL) REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO THIS 

MANUAL OR THE INFORMATION, CONTENT, MATERIALS OR PRODUCTS INCLUDED IN THIS MANUAL INCLUDING, WITHOUT LIMITATION, 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN ADDITION, EDGE DOES NOT REPRESENT OR WARRANT 

THAT THE INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT, AND THAT ALL SPECIFICATIONS AND INFORMATION 

CONTAINED WITHIN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. EDGE RECOMMEND CAUTION WHEN LISTENING TO MUSIC 

REPRODUCED THROUGH EDGE EQUIPMENT. EDGE EQUIPMENT IS CAPABLE OF PRODUCING SOUND AND SOUND PRESSURE LEVELS THAT 

CAN PERMANENTLY DAMAGE HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND SHOULD BE 

CLEAR WITHOUT DISTORTION AT A COMFORTABLE VOLUME. BY USING ANY EDGE EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY 

FOR YOUR OWN SAFETY AND THE SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU HAVE 

PURCHASED. USE OF ANY EDGE EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER.

Except as specifically stated in this manual, to the fullest extent permitted at law, neither EDGE nor any of its affiliates, directors, employees or other 

representatives will be liable for damages arising out of or in connection with the use of this manual or the information, content, materials or products 

included.

This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory, direct, indirect or 

consequential damages, loss of data, income or profit, loss of or damage to property and claims of third parties. For the avoidance of doubt, EDGE does 

not limit its liability for death or personal injury to the extent only that it arises as a result of negligence of EDGE, its affiliates, directors, employees or other 

representatives.

Summary of Contents for Street Series ED7300-E2













Reviews: