5 Remove the PCM from the plastic housing and remove the plastic cap exposing
the terminal.
6 With the provided Scotch-Brite pad clean the rubberized protective coating off
of the terminal contacts. Both sides of the terminal need to be cleaned. It is
important that the contacts are sufficiently clean to avoid any connection issues.
CAUTION: Be careful when cleaning the connector to not damage the contacts
with excessive force.
NOTE: For better access to clean the terminal contacts. The (6) 5.5mm bolts can be
removed and the PCM split open. This needs to be done in a clean enviroment.
7 Use the Alcohol Prep pad to wipe away any debris on the terminal contacts.
9
Summary of Contents for REVOLVER
Page 1: ...User Manual ...
