Evolution
FORD 4.6 and 5.4 Liter
5
Caution: The Evolution employs carefully modified strategies that are designed to be
utilized on unmodified (stock) vehicles only.
Many aftermarket components such as cold air intake (CAI) kits, exhaust systems,
and throttle body spacers as well as forced induction systems (turbochargers,
superchargers, nitrous oxide, etc) alter the calculated airflow characteristics of the
engine. In addition, mechanical modifications to the engine such as displacement
changes, camshaft modification, and cylinder head modification may alter calculated
airflow characteristics.
Using any of these modifications (either alone or in any combination) in conjunction
with the Evolution is NOT RECOMMENDED as it may cause an excessively lean
condition which could result in engine damage.
Edge Products will not be responsible for any damages caused by using the
Evolution on a vehicle that has been modified from a stock configuration.
If you have used another tuner/programmer on your vehicle, you will need to
program back to stock and remove the device before using the Edge Products
Device.
Failure to return to stock may result in PCM failure or engine damage.
This product meets the emissions compliance requirements of the California
Air Resources Board and Federal Environmental Protection Agency and is
legal for sale and use on pollution-controlled vehicles operated on public
streets and highways. It must be installed and operated according to the
instructions provided in this user’s manual. Included with this product is a
sticker like the one pictured below for you to retain with your vehicle.
Programming your vehicle may expose existing defects in your vehicle’s PCM that
could disable your vehicle. It is advised that you do not program your vehicle in
remote locations in case of vehicle failure.
CARB/EPA Compliance
