Edge-Core WA6202A, User Manual

Page: 246 / 332

7
Command Line Interface
Table 7-17. Wireless Interface Commands
Command Function Mode Page
beacon-interval Configures the rate at which beacon signals are
transmitted from the access point
IC-W 7-103
dtim-period Configures the rate at which stations in sleep mode
must wake up to receive broadcast/multicast
transmissions
IC-W 7-103
fragmentation- length Configures the minimum packet size that can be
fragmented
IC-W 7-104
rts-threshold Sets the packet size threshold at which an RTS must
be sent to the receiving station prior to the sending
station starting communications
IC-W 7-105
super-a Enables Atheros proprietary Super A performance
enhancements
IC-W (a) 7-106
super-g Enables Atheros proprietary Super G performance
enhancements
IC-W (b/g) 7-106
description Adds a description to the wireless interface IC-W-VAP 7-107
ssid Configures the service set identifier IC-W-VAP 7-107
closed system Opens access to clients without a pre-configured
SSID
IC-W-VAP 7-108
max-association Configures the maximum number of clients that can
be associated with the access point at the same time
IC-W-VAP 7-108
assoc- timeout-interval
Configures the idle time interval (when no frames are
sent) after which a client is disassociated from the
VAP interface
IC-W-VAP 7-109
auth- timeout-value Configures the time interval after which clients must
be re-authenticated
IC-W-VAP 7-109
shutdown Disables the wireless interface IC-W-VAP 7-109
show interface wireless Shows the status for the wireless interface Exec 7-111
show station Shows the wireless clients associated with the access
point
Exec 7-113
7-94