Edge-Core VES3302-36, Quick Installation Manual

Page: 27 / 33

25
17.
Flow Chart to Create VES3302 SIP Line Server
Create SIP
LINE
Use Private
IP
Local
Domain
Server?
STUN
Enable?
Configure
WAN IP of
NAT WAN
side
Open Server Port
5060 /10000~10719
Yes
Disable STUN
Configure
WAN IP as
0.0.0.0
Yes
Yes
Configure
WAN IP as
0.0.0.0
No
No
Enable NAT
Traversal
(optional)
Disable
Register &
Outbound Proxy
WEB\Advance-SIP\Registrar
WEB\Advance-SIP\Common
WEB\IP Setting
WEB\Advance-SIP\STUN
WEB\Advance-SIP\STUN
Enable Caller ID
authentication
Enable Registrar
WEB\Advance-SIP\Registrar
Create SIP Entities
WEB\Advance-SIP\Common
WEB\Advance-SIP\Common
Configure Publice Addr.
for Server
(contact addr)@(Server IP)
WEB\Advance-SIP\Common
Configure SIP Number
for UA
Virtual device = xxxxx
(xxxxx: SIP number)
WEB\Channel
Check UA Registered list
WEB\Advance-SIP\Registrar
Reboot
WEB\BASIC
No
* Local Domain Server: Server and SIP Phone is used in the same
NAT environment, they communicates by Private IP
* Public Domain Server: Server use Public IP or get IP information
from STUN, for the registration of SIP device in Internet
* NAT Traversal: If SIP device is behind NAT, this function
prevents Signaling port of SIP device from timeout.
(Public Domain Server)
Open Server Port
5060
WEB\Advance-SIP\STUN
WEB\Advance-SIP\STUN
IP Sharing
Device
IP Sharing
Device