Quick Start Guide
– 2 –
Mount the AP
The included mounting brackets are designed for pole mounting and
provide additional degrees of movement for antenna alignment.
a. Using a Single Bracket (Parallel)
1.
Install the bracket onto the AP using the included four screws.
2.
Thread the included steel hose clamps through the eyelets on the
back of the Mounting Bracket and then lightly fasten them around
the pole. Both hose clamps must be used for pole mounting.
b. Using Two Brackets (Tilt)
1.
Attach the two main sections of the bracket using the four included
screws and lock nuts.
.
2.
Install the bracket onto the AP using the included four screws.
3.
Thread the included steel hose clamps through the eyelets on the
back of the Mounting Bracket and then lightly fasten them around
the pole. Both hose clamps must be used for pole mounting.
c. (Optional) Using Two Brackets (Perpendicular)
1.
Attach the two main sections of the bracket using the four included
screws and lock nuts. This requires an optional bracket.
2.
Install the bracket onto the AP using the included four screws.
3.
Thread the included steel hose clamps through the eyelets on the
back of the Mounting Bracket and then lightly fasten them around
the pole. Both hose clamps must be used for pole mounting.
Warning:
For a safe and reliable installation, use only the
accessories and screws provided with the device. Use of other
accessories and screws could result in damage to the unit. Any
damages incurred by using unapproved accessories are not
covered by the warranty.
Avertissement:
Pour une installation sûre et fiable, utilisez
uniquement les accessoires et les vis fournies avec l’appareil.
L’utilisation d’autres accessoires et vis pourrait endommager
l’appareil. Les dommages causés par l’utilisation d’accessoires
non approuvés ne sont pas couverts par la garantie.
Note:
The drawings in this document are for illustration only
and may not match your particular model.
1
2
1
3
2
Installation
