background image

 

 

Quick Installation Guide 

ECWO5211-L  Enterprise  Access  Point 

ENGLISH 

   

 

Power LED 

ECWO5211-L  status.  The  Power  LED  will  start  blinking  when  the 

ECWO5211-L  is  booting.  After  finishing  booting,  the  Power  LED  will  always 

on. 

LAN1 LED 

Uplink status. The LAN1 LED will light up when there is traffic passing through 

the LAN1 port.

 

LAN2 LED 

LAN status. The LAN LED will light up when there is traffic passing through the 

LAN port.

 

2.4G LED 

2.4G Wi-Fi status. The 2.4G LED will blink when there is 2.4G traffic.

 

5G LED 

5G Wi-Fi status. The 5G LED will blink when there is 5G traffic.

 

LAN1 (PoE) Port 

Offers  uplink  connection.  This  port  can  be  used  to  connect  to  a  controller, 

gateway, or directly to the Internet. 802.3at PoE is also supported.

 

Ventilation Valve 

Due  to  extreme  weather  conditions,  water  vapor  in  the  ECWO5211-L  may 

condense. The valve allows ventilation to prevent moisture buildup within the 

ECWO5211-L. 

LAN2 Port 

The ports for connections with LAN side devices.

 

Wall Mounting Holes 

For hanging ECWO5211-L. 

10 

Pole Mounting Gap 

For mounting ECWO5211-L. 

 

 

 

 

 

Summary of Contents for ECWO5211-L











Reviews: