Edge-Core ECWO3220, Management Manual

Page: 46 / 66

Chapter 4
| Wireless Settings
Radio Settings
– 46 –
■
Route to Internet — Configures an interface as a member of the LAN.
Traffic from this interface is routed across the access point and out through
an interface which is bridged to the Internet. (See
Figure 7, “Route to
Internet", on page 18 .)
■
Network Name — The network to be routed. The default is “Default
local network” as displayed under LAN Settings – Local Network.
■
Add to Guest Network — This interface can only support the guest
network.
■
Hotspot Controlled — This interface can only support hotspot services.
■
Configure Hotspot — Opens Hotspot Settings page.
■
VLAN Tag Traffic — Tags any packets passing from this VAP (virtual access
point) to the associated Ethernet port as configured under “VLAN Settings”
on page 50 . (Range: 3-4095)
◆
Limit Upload — Enables rate limiting of traffic from the VAP interface as it is
passed to the wired network. You can set a maximum rate in Kbytes per second.
(Range: 256-10048576 Kbytes per second; Default: OFF)
◆
Limit Download — Enables rate limiting of traffic from the wired network as it
is passed to the VAP interface. You can set a maximum rate in kbytes per
second. (Range: 256-10048576 Kbytes per second; Default: OFF)
Advanced Settings
◆
802.11 Rates — The minimum data rate at which the AP transmits packets on
the wireless interface.
Table 3: 802.11 Data Rates
Option Rate (Max) Coding Method Radio 0 (5 GHz) Radio 1 (2.4 GHz)
Auto Auto Based on signal strength
√
√
1M 1 Mbps CKK √
2M 2 Mbps CKK √
5.5M 5.5 Mbps CKK √
11M 11 Mbps CKK √ √
6M 6 Mbps OFDM √ √
9M 9 Mbps OFDM √ √
12M 12 Mbps OFDM √ √
18M 18 Mbps OFDM √ √
24M 24 Mbps OFDM √ √
36M 36 Mbps OFDM √ √