How to Use This Guide
– 4 –
◆
— Includes information on network interfaces,
installing optional transceivers, and cabling specifications.
◆
— Connecting to the switch for management,
and information on the system status LEDs.
◆
— Information for troubleshooting switch
installation and operation.
Related
Documentation
This guide focuses on switch hardware and installation, it does not cover software
configuration of the switch. For specific information on how to operate and use the
management functions of the switch, see the following guide:
Management Guide
For all safety information and regulatory statements, see the following document:
Quick Start Guide
Safety and Regulatory Information
Conventions
The following conventions are used throughout this guide to show information:
Note:
Emphasizes important information or calls your attention to related features
or instructions.
Caution:
Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning:
Alerts you to a potential hazard that could cause personal injury.
Revision History
This section summarizes the changes in each revision of this guide.
November 2015 Revision
This is the third revision of this guide. This revision includes the following change:
◆
Updated specificaton information.
September 2013 Revision
This is the second revision of this guide. It includes the following change:
◆
Added CE declaration of conformance.
