Chapter 1
| Switch Description
Key Technical Specifications
– 13 –
Ground Point
The switch should be connected to ground using this screw connection. For more
information on how to connect ground to the switch, see
Key Technical Specifications
The following table contains key system specifications for the switch.
Table 1: Key Technical Specifications
Item
Specification
Ports
48 10/100/1000BASE-T RJ-45 ports with Auto-negotiation
4 Gigabit SFP transceiver slots
Network Interface
Ports 1~48: RJ-45
◆
RJ-45 connector, auto MDI/X
Ports 49~52: SFP
◆
Gigabit SFP transceivers
Buffer Architecture
8 Mbits
Aggregate Bandwidth
104 Gbps
Switching Database
16K MAC address entries
LEDs
System: Power, Diag (Diagnostic)
Ports 1~52: Status (link, activity, speed)
AC Input Power
ECS4110-52P: AC 100-240 V, 50-60 Hz, 7 A
ECS4110-52T: AC 100-240 V, 50-60 Hz, 1 A
Power Consumption
ECS4110-52P: 65 W
ECS4110-52T: 530 W
Weight
ECS4110-52T: 3.14 kg
ECS4110-52P: 5.27 kg
Size
(W x D x H):
ECS4110-52T: 44.0 x 28 x 4.4 cm (17.32 x 11.0 x 1.73 in)
ECS4110-52P: 44.0 x 37.9 x 4.4 cm (17.30 x 14.94 x 1.73 in)
Temperature
Operating: 0° C to 50° C (32° F to 122° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity
Operating: 10% to 95% (non-condensing)
Out-of-Band Management
Front Panel RJ-45 console port
In-Band Management
SSH, Telnet, SNMP, or HTTP
Software Loading
HTTP, FTP/TFTP in-band
Forwarding Mode
Store-and-forward
Throughput
Wire speed
Flow Control
Full Duplex: IEEE 802.3x
Half Duplex: Back pressure
