Chapter 6
| Switch Management
Understanding the System Status LEDs
– 42 –
Understanding the System Status LEDs
The switch includes a display panel of key system LED indicators. The LEDs, which
are located on the front panel, are shown below and described in the following
table.
Figure 20: System Status LEDs
(
System Status LEDs
Table 9: System Status LEDs
LED
Condition
Status
PWR
On Green
Internal power operating normally.
Off
No AC power is connected or the internal power supply
has failed.
DIAG
(Diagnostic)
On Green
The system diagnostic test has completed successfully.
On Amber
System diagnostic in progress.
Blinking Amber
The system self-diagnostic test has detected a fault.
Blinking Green
The switch system is booting up.
PoE Status
On Amber
Port LEDs display the individual port’s PoE status.
Blinking Amber
The PoE device power draw on the switch has reached at
least 95 percent of the maximum switch power output
capacity.
Off
Port LEDs display the individual port’s link and activity
status.
1
1
Summary of Contents for ECS3510-26P
Page 1: ...Installation Guide www edge core com ECS3510 26P 26 Port Layer 2 Gigabit Ethernet Switch ...
Page 13: ...Chapter 1 Switch Description Key Technical Specifications 13 ...
Page 24: ...Chapter 3 Switch Chassis Switch Cooling Requirements 24 ...
Page 28: ...Chapter 4 Power and Grounding How to Connect to AC Power 28 ...