Edge-Core Direk Tronik 24/48-Port, Management Manual, Page: 361 / 588

Client
41-9
41
Client
Terminal Access Controller Access Control System () is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
tacacs-server host
This command specifies the server. Use the no form to restore the
default.
Syntax
tacacs-server host host_ip_address
no tacacs-server host
host_ip_address - IP address of a server.
Default Setting
10.11.12.13
Command Mode
Global Configuration
Example
tacacs-server port
This command specifies the server network port. Use the no form to
restore the default.
Syntax
tacacs-server port port_number
no tacacs-server port
port_number - server TCP port used for authentication
messages. (Range: 1-65535)
Table 41-6 Client Commands
Command Function Mode Page
tacacs-server host Specifies the server GC 41-9
tacacs-server port Specifies the server network port GC 41-9
tacacs-server key Sets the encryption key GC 41-10
show tacacs-server Shows the current settings GC 41-10
Console(config)#tacacs-server host 192.168.1.25
Console(config)#