VT-100 Series -
Quickstart Guide - ED-006-012-04
11
KLICK FAST STUD
To attach a Klick Fast stud to your VT-100, you will need:
h
A VT-100
h
A Klick Fast stud
h
A Klick Fast dock (usually on a uniform),
Firstly, pinch the two metal clips on the back of the stud together, and slide the attachment into the
mounting rail on the back of your device until a firm click is heard. Release the metal clips.
Slide the VT-100 into the Klick Fast dock upside-down, so the device’s serial number is pointing
towards the ceiling. Once the stud is firmly attached to the dock, rotate the VT-100 by twisting it
until it is the right way up.
To detach a Klick Fast stud from the Klick Fast dock, rotate the device by 180 degrees, so the VT-100
is upside down again. The stud should slide out of the dock easily. It is now possible to detach the
stud from the VT-100. To do so, pinch the two metal clips on the back of the stud together, and slide
the stud upwards out of the attachment rail.
