EN
25
deFroStinG
Important:
disconnect your refrigerator before proceeding to defrost it.
Both compartments mustbe defrosted manually. The layer of frost
that forms on the walls must be removed when it is approx. 4mm
thick and in any case at least once a year.
To do this, you can use a plastic scraper or any plastic tool but never
anything metallic or an electrical appliance.
Leave the door open and sponge away the melt water as it forms. To
accelerate the defrosting process, you can place a bowl of hot water
in the compartment and close the door.
Before defrosting the
compartment, take care to pack your
frozen food in a freezer bag and keep it cool.
Once defrosting is complete, proceed to clean your appliance.
cleAninG And mAintenAnce
Warning:
Switch off your refrigerator before proceeding to clean it.
We recommend that you clean and disinfect your appliance regularly
• Clean the interior with water and bicarbonate of soda using a
sponge or a dishcloth to prevent any bad smells occurring.
• Never, under any circumstances, use solvents or abrasive deter-
gents because these could damage the interior of your appliance.
Also do not put any of the interior’s accessories in the dishwasher.
• We recommend that you dust the back of the appliance with a cloth
once a year because if it is dirty, your refrigerator’s output reduces
and its consumption increases.
cHAnGinG tHe liGHt BUlB
Warning:
disconnect your appliance before proceeding to change the light
bulb.
• Remove the tray from under the
compartment. The bulb is
behind the thermostat panel.
• Remove the bulb by unscrewing it counter-clockwise.
• Insert a new bulb of the same power as its predecessor.
• Replace the grill, reconnect the appliance and switch it on.
3 / ON-GOING MAINTENANCE OF YOUR APPLIANCE
