Edesa EGG-1240 TI TR CI N, Instruction Manual

Page: 49 / 104

14
c.) The plug must be taken out without forcing;
d.) If the product is built-in within a unit of furniture, it must not press on the plug while
the product is plugged in;
e.) 2 electrical appliances must not be connected to the same socket at the same time;
f.) If the power cable is to be replaced, a new cable of type H05VV-F with dimensions
3x1.5 mm² must be used.
g.) It is necessary to pay attention to the supporting poles of the null terminals.
(Brown=Phase, Blue=Neutral, Yellow-Green=Grounding)
Note: Ensure that your mains connection (voltage, maximum power and current values) is in
line with the features of your EDESA hob.
If the power cable gets damaged, it must be replaced with a specially designed cable or cable
assembly supplied by the manufacturer or authorised service provider.
This product contains grounding only for functional purposes.
Gas Connection
These instructions are only for qualified and specialist personnel. Installation of the appliance
must be in compliance with the applicable standards.
Electrical connection must be disconnected before starting any procedure.
Warning: The gas type and adjustment terms for this product are indicated on the
type label.
Warning: Before placing the product, please make sure that the local distribution
conditions (gas type and gas pressure) and product settings are suitable.
The authorised person/service provider performing the installation must make the
adjustments and installations as per the applicable mounting laws in the relevant
country.
The type of gas that must be used with the hob is indicated on the label that is on the lower
side of the hob. Connection to the main gas supply or to the gas cylinder must be established
after checking that the appliance has been set to the relevant gas type. If set correctly, please
check the following instructions.
BLUE
YELLOW - GREEN
BROWN