17
EDER Power Climber
270900_00 | 09.2021
CAUTION
Reaching into the rope entry area
Reaching into the rope entry area can cause injury.
Make sure that the cover is closed and do not reach into the rope
entry area.
Assembly and use
Check the functional interaction of your equipment elements with this
device. The equipment used must comply with the standard applicable
in your country.
Observe the applicable work safety regulations, directives on industrial
safety and health, and legislation in your country.
The possible configurations for using the EDER Power Climber are
shown below. Before ascending or descending with the device,
familiarise yourself with the local situation and check whether it is
possible to set it up and use it in accordance with the applicable safety
standards.
ATTENTION
The cover guides the rope around the rope sheave and prevents
the rope from slipping and thus being damaged by the pulley.
Make sure that the cover is properly engaged.
Damage to the pulley
A dirty or sandy rope increases the friction between the sheave
and the rope, resulting in increased wear or damage to the sheave
and the rope.
